A tap that will not stop dripping or a toilet that runs all night is more than annoying; it quietly wastes water and pushes up your bill. Our licensed Sydney plumbers repair and replace leaking taps, running toilets, mixers, cisterns and connectors, usually the same day, with a $0 call-out fee and a fixed price before we start.
Tap or toilet playing up? Call us on 0461 330 531, and we will get a licensed plumber to you.
$0, every job
Sydney-wide
Same-day, 24/7
NSW Licensed & Insured
From a quick washer change to a full toilet suite replacement, we cover every kind of tap and toilet job.
That steady drip is almost always a worn washer, O-ring or seat. We strip the tap down, replace the worn parts, and stop the drip and the wasted water for good.
Mixer taps that are stiff, leaking at the spout or no longer holding temperature usually need a new cartridge or ceramic disc. We repair them, or replace the whole tap if it makes more sense.
New kitchen, bathroom, laundry or garden taps supplied and installed, or your own fittings fitted properly and leak-tested. Tidy work, no drama.
A toilet that runs, hisses or refills on its own is usually a faulty flush valve, flapper or inlet valve. We replace the failed part and stop the constant trickle that drives up your bill.
A toilet that will not flush away, or backs up, often comes down to wipes, sanitary items or a blockage further down the line. We clear it and, if it is deeper, bring in the blocked drains gear.
Cracked pan, a cistern that will not seal, or a tired old suite? We supply and install new toilets and cisterns, remove the old unit, and leave it watertight.
From a dripping kitchen tap to a toilet that will not stop filling, taps and toilets are the most-used fittings in the house, so when they go they are hard to ignore. R&G Plumbing, Gas & Drainage is a Gordon-based local team with close to two decades of experience repairing and replacing taps and toilets right across Sydney. We find the real cause, fix it properly, and give you a fixed price before we start, with no charge just to come out.
Most repairs are done on the same visit. If a fitting is past saving we will tell you straight and quote a replacement instead. A blocked toilet that will not clear is usually a job for our blocked drains team, and a failed flexi-hose under the sink falls under burst and leaking pipe repairs, so whatever it turns out to be, the one team handles it. Call 0461 330 531 to book your tap or toilet repair.
No guesswork and no surprise bills. Here is exactly what happens from your first call.
Tell us what is happening, send a photo if it helps, and we will book a time that suits, often the same day, with no call-out fee.
We find the worn part or the root cause, not just the symptom, and explain what needs to be done.
You get a clear, fixed price before we start, with nothing added on afterwards.
We repair and test it to ensure it holds, tidy up, and leave your tap or toilet working as it should.
Small tap and toilet faults rarely fix themselves, and they quietly waste water every day they are left. Worth a call if you notice any of these.
A single dripping tap can waste thousands of litres a year, and a silently running toilet far more. Most of these are quick, inexpensive fixes when they are caught early.
Most tap and toilet faults come down to a handful of worn parts. Here is what is usually behind them, and what we do about it.
The classic dripping tap. Years of use wear down the rubber washer or O-ring until the tap can no longer seal. A quick part swap stops the drip.
Stiff or leaking mixer taps usually need a new cartridge or ceramic disc, and a corroded or cracked valve seat will keep a tap weeping no matter how new the washer is.
A toilet that runs constantly is most often a flush valve or flapper that no longer seals, letting water trickle from the cistern into the bowl around the clock.
A cracked inlet valve or a misaligned float stops the cistern filling to the right level, so it either never stops filling or overflows past the top of the cistern.
Wipes, sanitary items and foreign objects are the usual culprits, since only toilet paper and waste should be flushed. We clear the blockage, or call in the drain gear if it sits deeper.
Perished cistern seals, loose pan connectors and ageing flexi-hoses lead to water pooling at the base. We reseal or replace the failed part, and check the other flexi-hoses while we are there.
We find the real cause first, then do the smallest fix that solves it properly, and only recommend replacement when a repair is not worth your money.
we inspect the tap or toilet, find the worn or failed part, and explain it in plain English.
washers, O-rings, cartridges, valve seats, flush valves and inlet valves replaced on the spot where the fitting is sound.
full tap mechanisms, cistern internals and tired flexi-hoses swapped for quality parts that last.
we make sure the repair holds, check water pressure, and flag anything else on its way out before it becomes a callback.
Here is how R&G compares when you just want a leaking tap or toilet sorted properly.
| R&G Plumbing | Other Plumbers | |
|---|---|---|
| Call-Out Fee | $0 call-out fee on every job | Hidden or added call-out charges |
| Speed | Same-day repairs across Sydney | Days of waiting for a small job |
| Pricing | Clear, fixed quote before work starts | Vague hourly rates and surprises |
| Approach | Repair first, replace only when it is smarter | Quick to replace the whole fitting |
| Scope | One team for taps, toilets, drains and pipes | Juggling trades for related jobs |
| Guarantee | Workmanship backed by a guarantee | Little or no cover on the work |










It depends on the fault. A worn washer or a new flush valve is a small job; a full tap or toilet replacement is larger. Because there is no call-out fee and we quote a fixed price before starting, you always know the cost before any work happens, with nothing added on afterwards.
A toilet that runs or refills on its own is almost always a flush valve, flapper or inlet valve that is no longer sealing, so water keeps trickling from the cistern into the bowl. It is a small fix, but worth doing quickly, because a running toilet can quietly waste a lot of water and money.
Usually, a worn washer or O-ring, or on a mixer tap a worn cartridge. Sometimes the valve seat the washer presses against is corroded and needs reseating. We replace the worn parts and, if the seat is damaged, repair that too so the drip does not come straight back.
In most cases, yes. We carry common tap and toilet parts on the van, so a leaking tap, running toilet or worn cistern is often repaired on the same visit. Larger replacements may be booked in once you have approved the quote.
We repair first wherever it makes sense, since a worn part is cheap to swap. Where a tap or toilet is corroded, cracked or simply past its best, a replacement is the smarter spend, and we will tell you straight which way is better value before you commit.
Yes. A toilet that will not clear is often a blockage in the pan or the line beyond it. We clear it, and if it sits deeper in the drain we bring in our blocked drains equipment, including a CCTV camera, to find and clear the cause.
Absolutely. Bring your own taps, mixer or toilet suite and we will install it properly, connect it, and leak-test it. We can also supply quality fittings if you would rather we sorted that too.
No. There is no charge for us to come out and assess the job anywhere we service in Sydney. You only pay once you have approved a clear, fixed quote, and seniors and pensioners save 10% on every job.
Call R&G Plumbing, Gas & Drainage on 0461 330 531 for fast, licensed tap and toilet repairs across Sydney, with a $0 call-out fee and a fixed price before we start, or request your free quote online.
Send a few details and we’ll get straight back to you, usually within minutes during business hours.
We assess the problem and quote before any work starts.
Across Sydney, with 24/7 availability for urgent blockages.
Fully licensed, insured, and backed by a workmanship guarantee.
Tell us what is going on and our team will get back to you quickly.
Call R&G Plumbing, Gas & Drainage on 0461 330 531 for fast, licensed tap and toilet repairs across Sydney, with a $0 call-out fee and a fixed price before we start, or request your free quote online.